1. High precision: the size and precision of the mold meet the customer's needs, which is the most important manifestation of the mold quality. Therefore, in the process of mould design and manufacturing, in order to ensure the dimensional accuracy of products, the requirements for mold accuracy should be higher than those for products, and should be specifically implemented in the corresponding design and manufacturing steps.
2. Low cost: price is always the main factor to be considered by customers. Therefore, mould materials, design and manufacturing personnel, and processing methods should be selected at the most economical price. The mould cost is closely related to the mold material, complexity, structural requirements, size and accuracy requirements, processing methods, etc. Although we cannot blindly pursue the lowest price, we also need to seek an appropriate and reasonable price, which requires finding the most reasonable price balance point under so many factors, which is very important for the reasonable explanation of the mold cost and the degree of customer acceptance.
3. Long service life: Since molds account for a large proportion of production costs, the longer the service life of molds, the lower the production costs for customers. Therefore, customers all hope that the mould has a long service life, which requires that this should be taken into account in the design, material selection, manufacturing and processing of the mould. Any omission in any link may lead to the shortening of the service life of the mould.
4. Short cycle: On the premise of ensuring mould quality, mold design and manufacturing time is relatively short, which not only means that customers can put into production faster and products can enter the market earlier, but also means that mold manufacturers have higher enterprise management level and mold manufacturing technology, which also saves mould manufacturers' cost investment, which is a happy result.